STK - Instruments
Physical Modelling
StkInstrument
Super-class for STK instruments. Useful for abstracting sets of such ugens.
- .noteOn - (float velocity) - trigger note on
- .noteOff - (float velocity) - trigger note off
- .freq - (float frequency) - set/get frequency (Hz)
- .controlChange - (int number, float value) - assert control change - numbers are instrument specific, value range: [0.0 - 128.0]
See examples/ugen/STKinstrument.txt
BandedWG
Banded waveguide modeling class. Extends STKInstrument
- .bowPressure (float, READ/WRITE) bow pressure [0.0 - 1.0]
- .bowMotion (float, READ/WRITE) bow motion [0.0 - 1.0]
- .bowRate (float, READ/WRITE) strike Position
- .strikePosition (float, READ/WRITE) strike Position
- .integrationConstant - ( float , READ/WRITE ) - ?? [0.0 - 1.0]
- .modesGain (float, READ/WRITE) amplitude for modes [0.0 - 1.0]
- .preset (int, READ/WRITE) instrument presets (0 - 3, see above)
- .pluck (float, READ/WRITE) pluck instrument [0.0 - 1.0]
- .startBowing (float, READ/WRITE) start bowing [0.0 - 1.0]
- .stopBowing (float, READ/WRITE) stop bowing [0.0 - 1.0] (inherited from StkInstrument)
- .noteOn - (float velocity) - trigger note on
- .noteOff - (float velocity) - trigger note off
- .freq - (float frequency) - set/get frequency (Hz)
- .controlChange - (int number, float value) - assert control change
See examples/ugen/BandedWG.txt
BlowBotl
STK blown bottle instrument. Extends STKInstrument
- .noiseGain - ( float , READ/WRITE ) - noise component gain [0.0 - 1.0]
- .vibratoFreq - ( float , READ/WRITE ) - vibrato frequency (Hz)
- .vibratoGain - ( float , READ/WRITE ) - vibrato gain [0.0 - 1.0]
- .volume - ( float , READ/WRITE ) - yet another volume knob [0.0 - 1.0]
- .startBlowing (float, READ/WRITE) begin blowing [0.0 - 1.0]
- .stopBlowing (float, READ/WRITE) stop blowing [0.0 - 1.0]
- .rate (float, READ/WRITE) - rate of attack (sec) (inherited from StkInstrument)
- .noteOn - (float velocity) - trigger note on
- .noteOff - (float velocity) - trigger note off
- .freq - (float frequency) - set/get frequency (Hz)
- .controlChange - (int number, float value) - assert control change
See examples/ugen/BlowBotl.txt
BlowHole
STK clarinet physical model with one register hole and one tonehole. Extends STKInstrument
- .reed (float, READ/WRITE) reed stiffness [0.0 - 1.0]
- .noiseGain - ( float , READ/WRITE ) - noise component gain [0.0 - 1.0]
- .vent (float, READ/WRITE) vent frequency [0.0 - 1.0]
- .pressure (float, READ/WRITE) pressure [0.0 - 1.0]
- .tonehole (float, READ/WRITE) tonehole size [0.0 - 1.0]
- .startBlowing (float, READ/WRITE) start blowing [0.0 - 1.0]
- .stopBlowing (float, READ/WRITE) stop blowing [0.0 - 1.0]
- .rate (float, READ/WRITE) rate of change (sec) (inherited from StkInstrument)
- .noteOn - (float velocity) - trigger note on
- .noteOff - (float velocity) - trigger note off
- .freq - (float frequency) - set/get frequency (Hz)
- .controlChange - (int number, float value) - assert control change
See examples/ugen/BlowHole.txt
Bowed
STK bowed string instrument class. Extends STKInstrument
- .bowPressure - ( float , READ/WRITE ) - bow pressure [0.0 - 1.0]
- .bowPosition - ( float , READ/WRITE ) - bow position [0.0 - 1.0]
- .vibratoFreq - ( float , READ/WRITE ) - vibrato frequency (Hz)
- .vibratoGain - ( float , READ/WRITE ) - vibrato gain [0.0 - 1.0]
- .volume - ( float , READ/WRITE ) - volume [0.0 - 1.0]
- .startBowing (float, READ/WRITE) begin bowing [0.0 - 1.0]
- .stopBowing (float, READ/WRITE) stop bowing [0.0 - 1.0]
- .rate (float, READ/WRITE) - rate of attack (sec) (inherited from StkInstrument)
- .noteOn - (float velocity) - trigger note on
- .noteOff - (float velocity) - trigger note off
- .freq - (float frequency) - set/get frequency (Hz)
- .controlChange - (int number, float value) - assert control change
See examples/ugen/Bowed.txt
Brass
STK simple brass instrument class. Extends STKInstrument
- .lip - ( float , READ/WRITE ) - lip tension [0.0 - 1.0]
- .slide - ( float , READ/WRITE ) - slide length [0.0 - 1.0]
- .vibratoFreq - ( float , READ/WRITE ) - vibrato frequency (Hz)
- .vibratoGain - ( float , READ/WRITE ) - vibrato gain [0.0 - 1.0]
- .volume - ( float , READ/WRITE ) - volume [0.0 - 1.0]
- .clear - ( float , WRITE only ) - clear instrument
- .startBlowing (float, READ/WRITE) start blowing [0.0 - 1.0]
- .stopBlowing (float, READ/WRITE) stop blowing [0.0 - 1.0]
- .rate (float, READ/WRITE) rate of change (sec) (inherited from StkInstrument)
- .noteOn - (float velocity) - trigger note on
- .noteOff - (float velocity) - trigger note off
- .freq - (float frequency) - set/get frequency (Hz)
- .controlChange - (int number, float value) - assert control change
See examples/ugen/Brass.txt
Clarinet
STK clarinet physical model class. Extends STKInstrument
- .reed - ( float , READ/WRITE ) - reed stiffness [0.0 - 1.0]
- .noiseGain - ( float , READ/WRITE ) - noise component gain [0.0 - 1.0]
- .clear - ( ) - clear instrument .vibratoFreq - ( float , READ/WRITE ) - vibrato frequency (Hz)
- .vibratoGain - ( float , READ/WRITE ) - vibrato gain [0.0 - 1.0]
- .pressure - ( float , READ/WRITE ) - pressure/volume [0.0 - 1.0]
- .startBlowing - ( float , WRITE only ) - start blowing [0.0 - 1.0]
- .stopBlowing - ( float , WRITE only ) - stop blowing [0.0 - 1.0]
- .rate - ( float , READ/WRITE ) - rate of attack (sec) (inherited from StkInstrument)
- .noteOn - (float velocity) - trigger note on
- .noteOff - (float velocity) - trigger note off
- .freq - (float frequency) - set/get frequency (Hz)
- .controlChange - (int number, float value) - assert control change
See examples/ugen/Clarinet.txt
Flute
STK flute physical model class. Extends STKInstrument
- .jetDelay - ( float , READ/WRITE ) - jet delay [...] item
- .jetReflection - ( float , READ/WRITE ) - jet reflection [...]
- .endReflection - ( float , READ/WRITE ) - end delay [...]
- .noiseGain - ( float , READ/WRITE ) - noise component gain [0.0 - 1.0]
- .clear - ( ) - clear instrument .vibratoFreq - ( float , READ/WRITE ) - vibrato frequency (Hz)
- .vibratoGain - ( float , READ/WRITE ) - vibrato gain [0.0 - 1.0]
- .pressure - ( float , READ/WRITE ) - pressure/volume [0.0 - 1.0]
- .startBlowing (float, READ/WRITE) begin bowing [0.0 - 1.0]
- .stopBlowing (float, READ/WRITE) stop bowing [0.0 - 1.0]
- .rate (float, READ/WRITE) - rate of attack (sec) (inherited from StkInstrument)
- .noteOn - (float velocity) - trigger note on
- .noteOff - (float velocity) - trigger note off
- .freq - (float frequency) - set/get frequency (Hz)
- .controlChange - (int number, float value) - assert control change
See examples/ugen/Flute.txt
Mandolin
STK mandolin instrument model class. Extends STKInstrument
- .bodySize (float, READ/WRITE) body size (percentage)
- .pluckPos (float, READ/WRITE) pluck position [0.0 - 1.0]
- .stringDamping (float, READ/WRITE) string damping [0.0 - 1.0]
- .stringDetune (float, READ/WRITE) detuning of string pair [0.0 - 1.0]
- .afterTouch (float, READ/WRITE) aftertouch (currently unsupported)
- .pluck - ( float , WRITE only ) - pluck instrument [0.0 - 1.0] (inherited from StkInstrument)
- .noteOn - (float velocity) - trigger note on
- .noteOff - (float velocity) - trigger note off
- .freq - (float frequency) - set/get frequency (Hz)
- .controlChange - (int number, float value) - assert control change
See examples/mand-o-matic.ck examples/ugen/Mandolin.txt
ModalBar
STK resonant bar instrument class. Extends STKInstrument
- .stickHardness - ( float , READ/WRITE ) - stick hardness [0.0 - 1.0]
- .strikePosition - ( float , READ/WRITE ) - strike position [0.0 - 1.0]
- .vibratoFreq - ( float , READ/WRITE ) - vibrato frequency (Hz)
- .vibratoGain - ( float , READ/WRITE ) - vibrato gain [0.0 - 1.0]
- .directGain - ( float , READ/WRITE ) - direct gain [0.0 - 1.0]
- .masterGain - ( float , READ/WRITE ) - master gain [0.0 - 1.0]
- .volume - ( float , READ/WRITE ) - volume [0.0 - 1.0]
- .preset - ( int , READ/WRITE ) - choose preset (see above)
- .strike - ( float , WRITE only ) - strike bar [0.0 - 1.0]
- .damp - ( float , WRITE only ) - damp bar [0.0 - 1.0]
- .clear - ( ) - reset [none]
- .mode - ( int , READ/WRITE ) - select mode [0.0 - 1.0]
- .modeRatio - ( float , READ/WRITE ) - edit selected mode ratio [...]
- .modeRadius - ( float , READ/WRITE ) - edit selected mode radius [0.0 - 1.0]
- .modeGain - ( float , READ/WRITE ) - edit selected mode gain [0.0 - 1.0] (inherited from StkInstrument)
- .noteOn - (float velocity) - trigger note on
- .noteOff - (float velocity) - trigger note off
- .freq - (float frequency) - set/get frequency (Hz)
- .controlChange - (int number, float value) - assert control change
See examples/modalbot.ck examples/ugen/ModalBar.txt
Saxofony
STK faux conical bore reed instrument class. Extends STKInstrument
- .stiffness - ( float , READ/WRITE ) - reed stiffness [0.0 - 1.0]
- .aperture - ( float , READ/WRITE ) - reed aperture [0.0 - 1.0]
- .blowPosition - ( float , READ/WRITE ) - lip stiffness [0.0 - 1.0]
- .noiseGain - ( float , READ/WRITE ) - noise component gain [0.0 - 1.0]
- .vibratoFreq - ( float , READ/WRITE ) - vibrato frequency (Hz)
- .vibratoGain - ( float , READ/WRITE ) - vibrato gain [0.0 - 1.0]
- .clear - ( ) - clear instrument
- .pressure - ( float , READ/WRITE ) - pressure/volume [0.0 - 1.0]
- .startBlowing (float, READ/WRITE) begin blowing [0.0 - 1.0]
- .stopBlowing (float, READ/WRITE) stop blowing [0.0 - 1.0]
- .rate (float, READ/WRITE) - rate of attack (sec) (inherited from StkInstrument)
- .noteOn - (float velocity) - trigger note on
- .noteOff - (float velocity) - trigger note off
- .freq - (float frequency) - set/get frequency (Hz)
- .controlChange - (int number, float value) - assert control change
See examples/ugen/Saxofony.txt
Shakers
PhISEM and PhOLIES class emulating systems of particles. Extends STKInstrument
- .preset - ( int , READ/WRITE ) - select instrument (0 - 22; see below)
- .energy - ( float , READ/WRITE ) - shake energy [0.0 - 1.0]
- .decay - ( float , READ/WRITE ) - system decay [0.0 - 1.0]
- .objects - ( float , READ/WRITE ) - number of objects [0.0 - 128.0] (inherited from StkInstrument)
- .noteOn - (float velocity) - trigger note on
- .noteOff - (float velocity) - trigger note off
- .freq - (float frequency) - set/get frequency (Hz)
- .controlChange - (int number, float value) - assert control change
Instrument preset numbers;
- Maraca = 0
- Cabasa = 1
- Sekere = 2
- Guiro = 3
- Water Drops = 4
- Bamboo Chimes = 5
- Tambourine = 6
- Sleigh Bells = 7
- Sticks = 8
- Crunch = 9
- Wrench = 10
- Sand Paper = 11
- Coke Can = 12
- Next Mug = 13
- Penny + Mug = 14
- Nickle + Mug = 15
- Dime + Mug = 16
- Quarter + Mug = 17
- Franc + Mug = 18
- Peso + Mug = 19
- Big Rocks = 20
- Little Rocks = 21
- Tuned Bamboo Chimes = 22
See examples/shake-o-matic.ck examples/ugen/Shakers.txt
Sitar
STK sitar string model class. extends STKInstrument
- .pluck (float, WRITE only) pluck string [0.0 - 1.0]
- .clear () reset (inherited from StkInstrument)
- .noteOn - (float velocity) - trigger note on
- .noteOff - (float velocity) - trigger note off
- .freq - (float frequency) - set/get frequency (Hz)
- .controlChange - (int number, float value) - assert control change
See examples/ugen/Sitar.txt
StifKarp
STK plucked stiff string instrument named after and based on the "Karplus-Strong" method of delay-based plucked string synthesis. Extends STKInstrument
- .pickupPosition - ( float , READ/WRITE ) - pickup position [0.0 - 1.0]
- .sustain - ( float , READ/WRITE ) - string sustain [0.0 - 1.0]
- .stretch - ( float , READ/WRITE ) - string stretch [0.0 - 1.0]
- .pluck - ( float , WRITE only ) - pluck string [0.0 - 1.0]
- .baseLoopGain - ( float , READ/WRITE ) - ?? [0.0 - 1.0]
- .clear - ( ) - reset instrument (inherited from StkInstrument)
- .noteOn - (float velocity) - trigger note on
- .noteOff - (float velocity) - trigger note off
- .freq - (float frequency) - set/get frequency (Hz)
- .controlChange - (int number, float value) - assert control change
See examples/stifkarp.ck examples/ugen/StifKarp.txt
VoicForm
Four formant synthesis instrument. Extends STKInstrument
- .phoneme (string, READ/WRITE) select phoneme ( see "name" in the table below )
- .phonemeNum - ( int , READ/WRITE ) - select phoneme by number [0.0 - 128.0] (see "number" in the table below)
- .speak (float, WRITE only) start singing [0.0 - 1.0]
- .quiet (float, WRITE only) stop singing [0.0 - 1.0]
- .voiced (float, READ/WRITE) set mix for voiced component [0.0 - 1.0]
- .unVoiced (float, READ/WRITE) set mix for unvoiced component [0.0 - 1.0]
- .pitchSweepRate (float, READ/WRITE) pitch sweep [0.0 - 1.0]
- .voiceMix (float, READ/WRITE) voiced/unvoiced mix [0.0 - 1.0]
- .vibratoFreq (float, READ/WRITE) vibrato frequency (Hz)
- .vibratoGain (float, READ/WRITE) vibrato gain [0.0 - 1.0]
- .loudness (float, READ/WRITE) 'loudness' of voice [0.0 - 1.0] (inherited from StkInstrument)
- .noteOn - (float velocity) - trigger note on
- .noteOff - (float velocity) - trigger note off
- .freq - (float frequency) - set/get frequency (Hz)
- .controlChange - (int number, float value) - assert control change
number | name |
description | notes |
0 | "eee" | beet | |
1 | "ihh" | bit | |
2 |
"ehh" | bet | |
3 |
"aaa" | bat | |
4 |
"ahh" | father | |
5 |
"aww" | bought | |
6 | "ohh" | bone | same as aww (bought) |
7 |
"uhh" | but | |
8 |
"uuu" | foot | |
9 |
"ooo" | boot | |
10 | "rrr" | bird | |
11 |
"lll" | lull | |
12 |
"mmm" | mom | |
13 |
"nnn" | nun | |
14 |
"nng" | sang | |
15 |
"ngg" | bong | |
16 |
"fff" | ||
17 |
"sss" | ||
18 |
"thh" | ||
19 |
"shh" | ||
20 |
"xxx" | not done yet |
|
21 |
"hee" | beet | |
22 |
"hoo" | boot | |
23 |
"hah" | father | |
24 |
"bbb" | not done yet | |
25 |
"ddd" | not done yet | |
26 |
"jjj" | not done yet | |
27 |
"ggg" | not done yet | |
28 |
"vvv" | not done yet | |
29 |
"zzz" | not done yet | |
30 |
"thz" | not done yet | |
31 |
"zhh" |
See examples/voic-o-form.ck examples/ugen/VoicForm.txt
STK Wavetable Synthesis
Moog
STK moog-like swept filter sampling synthesis class Extends ugen_STKStkInstrument
- .filterQ - ( float , READ/WRITE ) - filter Q value [0.0 - 1.0]
- .filterSweepRate - ( float , READ/WRITE ) - filter sweep rate [0.0 - 1.0]
- .vibratoFreq - ( float , READ/WRITE ) - vibrato frequency (Hz)
- .vibratoGain - ( float , READ/WRITE ) - vibrato gain [0.0 - 1.0]
- .afterTouch - ( float , WRITE only ) - aftertouch [0.0 - 1.0] (inherited from StkInstrument)
- .noteOn - (float velocity) - trigger note on
- .noteOff - (float velocity) - trigger note off
- .freq - (float frequency) - set/get frequency (Hz)
- .controlChange - (int number, float value) - assert control change
See examples/moogie.ck examples/ugen/Moog.txt
STK - FM Synths
FM
STK abstract FM synthesis base. Extends STKInstrument.
- .lfoSpeed (float, READ/WRITE) modulation speed (Hz)
- .lfoDepth (float, READ/WRITE) modulation depth [0.0 - 1.0]
- .afterTouch (float, READ/WRITE) aftertouch [0.0 - 1.0]
- .control1 (float, READ/WRITE) FM control 1 [instrument specific]
- .control2 (float, READ/WRITE) FM control 2 [instrument specific] it (inherited from StkInstrument)
- .noteOn - (float velocity) - trigger note on
- .noteOff - (float velocity) - trigger note off
- .freq - (float frequency) - set/get frequency (Hz)
- .controlChange - (int number, float value) - assert control change
See class examples/ugen/FM.txt
BeeThree
STK Hammond-oid organ FM synthesis instrument. Extends FM (see super classes)
See examples/ugen/BeeThree.txt
FMVoices
STK singing FM synthesis instrument. Extends FM (see super classes).
- .vowel (float, WRITE only) select vowel [0.0 - 1.0]
- .spectralTilt (float, WRITE only) spectral tilt [0.0 - 1.0]
- .adsrTarget (float, WRITE only) adsr targets [0.0 - 1.0]
See examples/ugen/FMVoices.txt
HevyMetl STK
STK heavy metal FM synthesis instrument. Extends FM (see super classes)
See examples/ugen/HevyMetl.txt
PercFlut
STK percussive flute FM synthesis instrument. Extends FM (see super classes)
See examples/ugen/PercFlut.txt
Rhodey
STK Fender Rhodes-like electric piano. Extends FM (see super classes)
extends FM (see super classes)
See examples/rhodey.ck examples/ugen/Rhodey.txt
TubeBell
STK tubular bell (orchestral chime) FM bell. Extends FM (see super classes).
See examples/ugen/TubeBell.txt
Wurley
STK Wurlitzer electric piano. Extends FM (see super classes).
See examples/wurley.ck